AUTOMATIC MICRO-COMPUTERIZED FLEXOGRAPHY PROCESSOR |
Exposure¡BDrying¡BLight Finishing¡BAutomatic Plate Washing¡BCleansing Liquid Cleaning¡BPre-drying
|
|
|
¡@¡@¡@¡@Exposure Machine + Light Finisher + Dryer |
¡@¡@¡@¡@¡@¡@Equipped with forced vacuum machine and latest air suction method, guaranteed to complete adsorption |
¡@¡@¡@¡@¡@¡@with 3 ¡V 10 seconds. |
¡@¡@¡@¡@¡@¡@Latest fault feedback LED indication electronic ballast, UV tube is equipped with external fault sensor for |
¡@¡@¡@¡@¡@¡@safety and reduces loss. |
¡@¡@¡@¡@¡@¡@Using the most sophisticated high power UV tube to facilitate quick and uniform exposure and exquisite |
¡@¡@¡@¡@¡@¡@plate making. |
¡@¡@¡@¡@¡@¡@Build with UVA tube and special UVC tube, exposure processing and post-exposure is done in one time. |
¡@¡@¡@¡@¡@¡@After processing the plate printing can be stable, eliminates viscosity on the plate surface, increases the
|
¡@¡@¡@¡@¡@¡@printing durability of |
¡@¡@¡@¡@¡@¡@plate, drying oven, 3-layer racks, insulation design, safe, and power saving. |
¡@¡@¡@¡@¡@¡@This equipment can be located under the pre-drying machine to save space. |
|
¡@¡@¡@¡@¡@Automatic Link Flexible Plate Washer |
¡@¡@¡@¡@¡@¡@Air-tight design, waste gas is emitted outdoor, very environmental concept. |
¡@¡@¡@¡@¡@¡@After punching holes on the exposed plates and hang on the special conducting plate, it is ready for |
¡@¡@¡@¡@¡@¡@plate washing. |
¡@¡@¡@¡@¡@¡@Automatic circulating solution, solution concentration is digitalize controlled for free setup any time. |
¡@¡@¡@¡@¡@¡@Not dripping type, therefore it absolutely not cause any clogging and breakdown problem. |
¡@¡@¡@¡@¡@¡@In the course of plate washing, it is brushed backward lying flat and rotary brushed, the wash-out plates |
¡@¡@¡@¡@¡@¡@are very neat. |
¡@¡@¡@¡@¡@¡@Pumping clean solutions to rinse the washed plate is fully automatic controlled, intermittent pumping upon |
¡@¡@¡@¡@¡@¡@arrival of plates. |
¡@¡@¡@¡@¡@¡@In order to avoid wasting, pumping quantity can be adjusted freely, pumping stops immediately when the |
¡@¡@¡@¡@¡@¡@plates passed. |
¡@¡@¡@¡@¡@¡@Plates are rinsed with clean solution to save the time for wiping the surface. |
¡@¡@¡@¡@¡@¡@Before finishing, it also passes preliminary drying, absolutely won¡¦t dirty your hand. |
¡@¡@¡@¡@¡@¡@Able to make automatic continuous plate feeding during the whole process of plate washing, mass production. |
¡@¡@¡@¡@¡@¡@8 sets of memory for thick and thin plate adjustment, by pressing a key, the thickness and washing |
¡@¡@¡@¡@¡@¡@speed can be adjusted coordinately. |
¡@¡@¡@¡@¡@¡@There are 15-section speeds to coordinate plate-washing speed with thickness, by pressing a key, washing |
¡@¡@¡@¡@¡@¡@speed can be adjusted during machine running. |
¡@¡@¡@¡@¡@¡@High-tech man-machine interface touch screen for easy operation and job data display. |
¡@¡@¡@¡@¡@¡@Able to make first class of printing plate with various brands of flexible plate material.It is applicable to |
¡@¡@¡@¡@¡@¡@the printing of carton, paper box, label, tape, soft package, paper bag, shopping bag, knitting bag, etc. |
¡@¡@¡@¡@¡@¡@specially theplate-making for high quality color flexible printing and mass production. |
|
Exposure Machine + Light Finisher + Dryer |
SPECIFICATIONS |
GT-900 |
GT- 660 |
GT- 460 |
Effective Area |
900 ¡Ñ 1300 mm |
660 ¡Ñ 920 mm |
460 ¡Ñ 660 mm |
Voltage Used |
AC 220V 50/60 Hz |
Power Consumption |
8.0 KW |
7.0 KW |
5.5 KW |
Machine Size |
168¡Ñ125¡Ñ85 cm |
146¡Ñ106¡Ñ82 cm |
110¡Ñ92¡Ñ82 cm |
Machine Weight |
350 kg |
280 kg |
195 kg |
Automatic Plate Washing Machine |
Effective Area |
900 ¡Ñ 1300 mm |
660 ¡Ñ 920 mm |
460 ¡Ñ 660 mm |
Voltage Used |
AC 220V 50/60 Hz |
|
Power Consumption |
7.5 KW |
5.0 KW |
4.5 KW |
Machine Size |
150¡Ñ362¡Ñ145 cm |
332¡Ñ116¡Ñ145 cm |
275x92¡Ñ145 cm |
Machine Weight |
400 kg |
320 kg |
250 kg |
|
|
ROTARY & FLAT EXPOSURE PROCESSOR |
¡@¡@¡@¡@¡@This Rotary & Flat Exposure Processor is designed for making polymer plate, relief plate and flexography. |
¡@¡@¡@¡@¡@It is suitable for cylinder type & flat type printing machine, such as label printing, cylinder type trademark printing¡@¡@ |
¡@¡@¡@¡@¡@or computer form printing. The cylinder used in the processor is same size as if used in the printing machine. |
¡@¡@¡@¡@¡@Put the negative film on the polymer plate and circle around the cylinder, then the negative is sucked firmly by the |
¡@¡@¡@¡@¡@strong vacuum machine and carry out exposure, this can solve the single-way lengthening issue during printing. |
|
|
|
Model |
GT-P-RA2 |
Max. Plate Width¡G |
420 mm. (16.5") |
Cylinder Circumference¡G |
610 mm. (24") ¡V 200 mm (8¡¨) |
Max. Flat Exposure¡G |
440 mm ¡Ñ 620 mm |
Machine Size (mm)¡G |
W 900 x Depth 500 x H 1200 |
Machine Net Weight¡G |
100 Kg |
Total Power Required¡G |
1.5 KW |
Exposure¡G |
UV-A lamp (40 W ¡Ñ 24 pc) |
Standard Accessory¡G |
one cylinder based on the size required |
|
|
|
¡@¡@¡@ |
¡@¡@¡@¡@¡@Relatively big rotary exposure processor, suits for partly glazing, paper box printing etc. |
¡@¡@¡@¡@¡@Using the former-size negative to expose, the single-way lengthening issue can be solved effectively. |
|
|
MODEL |
GT-RA0 |
GT-R3040 |
Effective Area |
1300 ¡Ñ 840 mm |
1016¡Ñ762 mm |
Voltage Used |
AC220V 50/60 Hz |
Power Consumption |
2.0 KW |
1.8 KW |
Machine Size |
185¡Ñ85¡Ñ125 cm |
155¡Ñ85¡Ñ125 cm |
Machine Weight |
180 kg |
145 kg |
|
|
|
¡@¡@¡@Flexography Letterpress Plate-making Machine |
¡@¡@¡@ ¡@¡@Exposure¡Ï Washing¡Ï Drying 3-In-1 Floor Type |
All functions are compactly packaged into one suit of machine |
with a minimum of space requirement. |
All controls are located in the front of the machine. |
A drawer type exposure device is easy to load and unload |
negatives and block plates. |
For uniform light exposure throughout a sufficient number of |
lighting tubes are furnished. |
Wash-out of the exposed plate is performed in the liquid tank wherein |
brushes and moving plate holder are arranged. |
wherein brushes and moving plate holder are arranged |
For speedy and uniform drying of the developed plate a hot |
air blowing type drying oven is also equipped. |
Applicable to any cleaning materials of any brand |
of solvent, water and alcohol. |
|
|
|
MODEL |
GT-FA2 |
GT-FB3 |
GT-FA3 |
GT-FA4 |
Effective Area |
62¡Ñ44 cm |
50¡Ñ37 cm |
30x42 cm |
21x30 cm |
Power Consumption |
3.0 KW |
2.5 KW |
2.5 KW |
1.8 KW |
Machine Size |
96¡Ñ76¡Ñ102 cm |
85¡Ñ56¡Ñ102 cm |
68¡Ñ58¡Ñ91 cm |
57¡Ñ50¡Ñ91 cm |
Machine Weight |
125 kg |
110 kg |
95 kg |
80 kg |
|
|
¡@¡@¡@¡@ |
¡@¡@¡@¡@¡@Professional type Resin/Soft resin plate-making machine. |
¡@¡@¡@ ¡@¡@¡@Exposure/Plate-wash-out Independent type, easy for mass plate-making. |
|
Exposing Machine |
Strong absorption vacuum machine with noise-free effect, |
super-strong UV tube provide most steady wave. |
|
|
|
MODEL |
GT-PA0 |
GT-PA1 |
GT-PA2 |
GT-PB3 |
Effective Area |
130¡Ñ84 cm |
60 x 84 cm |
62¡Ñ44 cm |
50¡Ñ37 cm |
Power Consumption |
1.8 KW |
1.5 KW |
1.2 KW |
0.8 KW |
Machine Size |
155¡Ñ100¡Ñ45 cm |
125¡Ñ78¡Ñ38 cm |
76¡Ñ77¡Ñ38 cm |
70¡Ñ64¡Ñ38 cm |
Machine Weight |
110 kg |
75 kg |
52 kg |
45 kg |
|
|
Plate-Wash-out-Drying |
Made of stainless steel, safe to clean with water, |
alcohol and solvent. |
Plate-Cleaning + Drying complete piece device. |
Easy operation and require minimal space. |
|
|
|
MODEL |
GT-PA0 |
GT-PA1 |
GT-PA2 |
GT-PB3 |
Effective Area |
130 ¡Ñ 84 cm |
60 x 84 cm |
62 ¡Ñ 44 cm |
50 ¡Ñ 37 cm |
Power Consumption |
3.5 KW |
3.0 KW |
2.5 KW |
1.5 KW |
Machine Size |
150¡Ñ100¡Ñ92 cm |
106¡Ñ77¡Ñ92 cm |
79x91¡Ñ92 cm |
68x76¡Ñ92 cm |
Machine Weight |
220 kg |
135 kg |
110 kg |
75 kg |
|
|
Light Finisher |
Able to be placed under the exposure machine to |
save space. |
To get ride of the viscosity of the plate's face after the |
plate is processed by this machine. |
Light Finisher is to extend the plate's life. |
|
|
|
MODEL |
A0 |
A1 |
A2 |
A3 |
Effective Area |
130¡Ñ84 cm |
60¡Ñ84cm |
62¡Ñ44cm |
50¡Ñ37 cm |
Machine Size |
150¡Ñ100¡Ñ32 cm |
125¡Ñ96¡Ñ32 cm |
76¡Ñ85¡Ñ32cm |
64¡Ñ76¡Ñ32 cm |
Machine Weight |
80 kg |
60 kg |
45 kg |
40 kg |
|
|
¡@¡@
|